csw-alarm-cli

A command line application that facilitates interaction with Alarm Service. It accepts various commands to load and retrieve alarm data, to subscribe to severity and health activities of alarm, and to change current of the state of alarms.

Supported Commands

• init
• list
• acknowledge
• unacknowledge
• activate
• deactivate
• shelve
• unshelve
• reset
• severity
• health

Admin API

The commands listed below will be used by administrators of the alarm service.

init

Loads the alarm data in the alarm store

• file path - is a required parameter. Can be of local disk or config server (by default it will be picked from the config service.
• --local - this specifies that config file must be picked up from local disk
• --reset - this is an optional parameter to clear previous data before loading the new one. By default it will be false.

Examples

csw-alarm-cli init /path/allAlarms.conf --local --reset

Clears the alarm store and loads alarm data to alarm store from /path/allAlarms.conf which is a path of a local file.

list

Gets the data of alarms from alarm store. If none of the optional parameters are given then by default, data of all alarms will be displayed.

• --subsystem - is an optional parameter to get the data of a specific subsystem’s alarms
• --component - is an optional parameter to get the data of a specific component’s alarms. --subsystem must be specified with this parameter.
• --name - is an optional parameter to get the data of a specific alarm. --subsystem and --component must be specified with this parameter.
• --metadata - is an optional parameter to get only the metadata of alarms
• --status - is an optional parameter to get only the status of the alarms

Examples

1.

csw-alarm-cli list --subsystem nfiraos --component trombone --name tromboneAxisLowLimitAlarm

Displays metadata, status and severity of alarm with name tromboneAxisLowLimitAlarm of component trombone and subsystem nfiraos.

2.

csw-alarm-cli list --subsystem nfiraos --metadata --status

Displays metadata and status of all alarms which belong to nfiraos subsystem.

Operations specific to an alarm

Commands given below are specific to an alarm. All of commands must be provided with --subsystem,--component and --name as parameters.

• --subsystem - is a parameter to specify the subsystem of alarm
• --component - is a parameter to specify the component of alarm
• --name - is a parameter to specify the name of the alarm

acknowledge

Sets the acknowledgement status of the alarm to Acknowledged

Examples

csw-alarm-cli acknowledge --subsystem nfiraos --component trombone --name tromboneAxisLowLimitAlarm

Acknowledge the alarm with name tromboneAxisLowLimitAlarm of component trombone and subsystem nfiraos.

unacknowledge

Sets the acknowledgement status of the alarm to Unacknowledged

Examples

csw-alarm-cli unacknowledge --subsystem nfiraos --component trombone --name tromboneAxisLowLimitAlarm

Unacknowledge the alarm with name tromboneAxisLowLimitAlarm of component trombone and subsystem nfiraos.

activate

Sets the activation status of the alarm to Active

Examples

csw-alarm-cli activate --subsystem nfiraos --component trombone --name tromboneAxisLowLimitAlarm

Sets activation status to Active of the alarm with name tromboneAxisLowLimitAlarm of component trombone and subsystem nfiraos.

deactivate

Sets the activation status of the alarm to Inactive

Examples

csw-alarm-cli inactivate --subsystem nfiraos --component trombone --name tromboneAxisLowLimitAlarm

Sets activation status to Inactive of the alarm with name tromboneAxisLowLimitAlarm of component trombone and subsystem nfiraos.

shelve

Sets the shelve status of the alarm to Shelved

Examples

csw-alarm-cli shelve --subsystem nfiraos --component trombone --name tromboneAxisLowLimitAlarm

Shelves the alarm with name tromboneAxisLowLimitAlarm of component trombone and subsystem nfiraos.

unshelve

Sets the shelve status of the alarm to Unshelved

Examples

csw-alarm-cli unshelve --subsystem nfiraos --component trombone --name tromboneAxisLowLimitAlarm

Unshelves the alarm with name tromboneAxisLowLimitAlarm of component trombone and subsystem nfiraos.

reset

Resets the alarm status. This will set the acknowledgement Status to Acknowledged and the latched severity to the current severity of the alarm.

Examples

csw-alarm-cli reset --subsystem nfiraos --component trombone --name tromboneAxisLowLimitAlarm

Resets the alarm with name tromboneAxisLowLimitAlarm of component trombone and subsystem nfiraos.

severity

Severity command contains 3 sub-commands.

get

Used to get the severity of the subsystem, component or alarm. If none of the optional parameters are given then severity of whole TMT system will be displayed.

• --subsystem - is an optional parameter to get the severity of a specific subsystem’s alarms
• --component - is an optional parameter to get the severity of a specific component’s alarms. --subsystem must be specified with this parameter.
• --name - is an optional parameter to get the severity of a specific alarm. --subsystem and --component must be specified with this parameter.

Examples

1.

csw-alarm-cli severity get --subsystem nfiraos --component trombone --name tromboneAxisLowLimitAlarm

Displays severity of alarm with name tromboneAxisLowLimitAlarm of component trombone and subsystem nfiraos.

2.

csw-alarm-cli severity get --subsystem nfiraos --component trombone

Displays aggregated severity of component with name trombone of subsystem nfiraos.

set

Sets the given severity for the alarms

• severity to which given alarm needs to be set
• --subsystem - is a parameter to specify the subsystem of alarm
• --component - is a parameter to specify the component of alarm
• --name - is a parameter to specify the name alarm
• --refresh - is an optional parameter to refresh severity after every 3 seconds

Examples

1.

csw-alarm-cli severity set major --subsystem nfiraos --component trombone --name tromboneAxisLowLimitAlarm

Sets Major as the severity of alarm with name tromboneAxisLowLimitAlarm of component trombone and subsystem nfiraos.

2.

csw-alarm-cli severity set major --subsystem nfiraos --component trombone --name tromboneAxisLowLimitAlarm --refresh

Refresh Major as the severity of alarm with name tromboneAxisLowLimitAlarm of component trombone and subsystem nfiraos after every 3 seconds.

subscribe

Subscribes to the severity changes of the whole TMT system, subsystem, component or an alarm. If none of the optional parameters are given then the severity of the whole TMT system will be displayed.

• --subsystem - is an optional parameter to get the severity of a specific subsystem’s alarms
• --component - is an optional parameter to get the severity of a specific component’s alarms. --subsystem must be specified with this parameter.
• --name - is an optional parameter to get the severity of a specific alarm. --subsystem and --component must be specified with this parameter.

Examples

1.

csw-alarm-cli severity subscribe --subsystem nfiraos --component trombone

Subscribes to the aggregated severity of a component with name trombone and subsystem nfiraos.

health

Health command contains two sub-commands.

get

Gets the health of the whole TMT system, subsystem, component or alarm. If none of the optional parameters are given then the health of the whole TMT system will be displayed.

• --subsystem - is an optional parameter to get the health of a specific subsystem’s alarms
• --component - is an optional parameter to get the health of a specific component’s alarms. --subsystem must be specified with this parameter.
• --name - is an optional parameter to get the health of a specific alarm. --subsystem and --component must be specified with this parameter.

Examples

1.

csw-alarm-cli health get --subsystem nfiraos --component trombone --name tromboneAxisLowLimitAlarm

Displays health of alarm with name tromboneAxisLowLimitAlarm of component trombone and subsystem nfiraos.

2.

csw-alarm-cli health get --subsystem nfiraos

Displays aggregated health of subsystem with name nfiraos.

subscribe

Subscribes to the health changes of the whole TMT system, subsystem, component or an alarm. If none of the optional parameters are given then the health of the whole TMT system will be displayed.

• --subsystem - is an optional parameter to get the health of a specific subsystem’s alarms
• --component - is an optional parameter to get the health of a specific component’s alarms. --subsystem must be specified with this parameter.
• --name - is an optional parameter to get the health of a specific alarm. --subsystem and --component must be specified with this parameter.

Examples

1.

csw-alarm-cli health subscribe --subsystem nfiraos --component trombone

Subscribes to the aggregated health of subsystem with name nfiraos.

About this application

–help

Prints the help message.

–version

Prints the version of the application.